Mixed metal oxide
MMO Titanium Anodes
Mixed metal oxide anodes on Gr1/Gr2 titanium. The oxide family is chosen from your electrolyte and target reaction, such as chlorine evolution or oxygen evolution.
- Ru-Ir
- Ir-Ta
- Plate
- Mesh
- Rod / tube
Skip to products
MMO Titanium Anode
Platinized Titanium Anode
Custom Titanium Electrode
Electrolytic Cell
- Home
- Products
Titanium Anodes, Electrodes and Electrolytic Cells, Built Around Your Process
MMO and platinized titanium anodes, custom titanium electrodes and complete electrolytic cells from one factory team. We start from your electrolyte, current load and drawing, so the first sample you test is already close to production.
Product Range
Four Product Lines, One Engineering Team
Pick the line closest to your project. Each product page explains the coating logic, the titanium forms, the data we need and how a sample moves to repeat supply.
Platinum coated
Platinized Titanium Anodes
Platinum coated titanium plates, meshes, rods, tubes and welded assemblies. Coated and masked zones follow your drawing, and coating thickness or loading is confirmed per project.
- Plate
- Mesh
- Rod
- Tube
- Welded assembly
Drawing-based
Custom Titanium Electrodes
Start from a drawing, an existing sample or your equipment measurements. Holes, tabs, active area and connections are built as drawn, after a manufacturability review.
- DWG / STEP / PDF
- Sample matching
- 1–10 piece samples
Complete assembly
Electrolytic Cells
Electrodes, chamber, flow path, busbars and connections designed as one matched assembly, so you validate one system from one factory.
- Anodes & cathodes
- Flow path
- Busbars
- Ports & mounts
Not sure which product line fits your project?
Start From Your Situation
Find the Right Product
Start From Your Situation, Not From a Coating Name
Most buyers arrive with one of four starting points. Pick yours and we will route you to the product page and the data that matters first.
I know my electrolyte and target reaction
Chloride, sulfate or mixed media, chlorine or oxygen evolution. The coating family is the first decision.
MMO or platinized anodesI have a drawing or an existing electrode
The part must fit an existing cell. Dimensions, holes, tabs and active area come first.
Custom titanium electrodesI need the whole cell, not only the electrode
Chamber, flow path, electrode spacing and connections are designed together with the electrodes.
Electrolytic cellsI only know what my equipment must do
Disinfect water, generate hypochlorite, plate metal, protect a structure. Start from the application.
Browse applicationsStill between two options? Send your operating data and we will tell you which line to evaluate first.
Ask an Engineer
Coating Families
Which Coating Family Fits Your Reaction?
The coating is selected by the anodic reaction and the electrolyte, not by the product name. This comparison shows where each family is usually discussed first.
| Coating family | Main anodic reaction | Typical media | What we confirm first | Product page |
|---|---|---|---|---|
| Ru-based MMORu-Ir oxide on titanium | Chlorine evolution | Brine, seawater, chloride-bearing water | Chloride level, pH, temperature, current density, polarity reversal | MMO titanium anodes |
| Ir-based MMOIr-Ta oxide on titanium | Oxygen evolution | Sulfate, acidic electrolytes, electrowinning baths | Acidity, target metal, fluoride or organic additives, current distribution | MMO titanium anodes |
| Platinized titaniumPlatinum layer on titanium | Process-specific, discussed per bath or device | Plating baths, compact devices, precision electrochemistry | Bath or water chemistry, current load, coated area, connection design | Platinized titanium anodes |
This table is a starting point for discussion. Coating loading, service life and suitability are confirmed only after we review your operating data.
Not sure which reaction dominates in your cell? Let our engineers check it with you.
Send Your Electrolyte DataMMO Titanium Anode
Mixed Metal Oxide
MMO Titanium Anodes for Chlorine and Oxygen Evolution
Ru-Ir and Ir-Ta oxide coatings on Gr1/Gr2 titanium, chosen from your electrolyte and target reaction so the coating is not worn by the wrong chemistry.
- Oxide family matched to chloride or sulfate media
- Active area sized to your current density
- Plate, mesh, expanded mesh, rod or tube substrate
Often evaluated for
- Electrochlorination
- Water treatment
- Electrowinning
- Cathodic protection
Want to see the oxide options and data checklist for MMO anodes?
View MMO Titanium AnodesPlatinized Titanium Anode
Platinum Coated
Platinized Titanium Anodes With Coated Zones as Drawn
Platinum is placed only where current flows. Coated and masked areas, welded tabs and busbar contacts follow your drawing, and loading is confirmed per project.
- Coated and masked zones defined on the drawing
- Tabs, studs and contacts welded in-house
- Coating thickness or loading agreed per project
Often evaluated for
- Electroplating
- Hydrogen water devices
- Electrodialysis
- Precision electrochemistry
Check whether platinized titanium fits your bath or device.
View Platinized Titanium AnodesCustom Titanium Electrode
Drawing-Based
Custom Titanium Electrodes That Fit Your Cell the First Time
Send a DWG, STEP or PDF drawing, an existing electrode or your equipment measurements. We review manufacturability before pricing, then build holes, tabs and active area as drawn.
- Manufacturability review before quotation
- Matching from a used or existing electrode
- 1–10 piece samples before volume orders
Starts from
- Drawing
- Sample part
- Equipment measurements
Have a drawing, part or measurement ready?
View Custom Titanium ElectrodesElectrolytic Cell
Complete Assembly
Electrolytic Cells Designed With Their Electrodes
When the electrode spacing, flow path and connections decide the result, we design the chamber and electrodes as one assembly from your reaction, electrolyte and current data.
- Anodes, cathodes and spacing matched together
- Flow path, gas release and drainage considered
- Busbars, ports and mounts to your interface
Often evaluated for
- Sodium hypochlorite
- Water treatment
- Hydrogen water
Need the cell, not only the electrode?
View Electrolytic Cells
Titanium Forms
Substrate Forms Available Across All Product Lines
The same coating can be applied to different titanium forms. The form is chosen by how your cell carries current, moves fluid and releases gas.
Plate
Flat active area for parallel-plate cells and tanks.
Mesh and expanded mesh
Open area for gas release and electrolyte flow.
Rod and wire
Compact anodes for pipes, tanks and small devices.
Tube
Concentric cells and cathodic protection strings.
Welded assembly
Several parts joined into one electrode unit.
Custom geometry
Holes, bends and active zones as drawn.
Not sure which form suits your cell? Tell us how current and fluid move through it.
Discuss the Titanium Form
Connection & Assembly
The Connection Matters as Much as the Coating
Many early failures start at the terminal, not on the active surface. We define how current enters the electrode before production starts.
Welded tabs and lugs
Titanium tabs welded in-house, sized to carry your current without hot spots.
Studs and threaded rods
Threaded connections for bolted terminals and quick replacement.
Busbar contacts
Contact faces and hole patterns matched to your busbar layout.
Masked and coated zones
Coating placed on the active area only, as defined on your drawing.
Send your terminal and busbar details with the drawing, and we will review the connection first.
Review My Connection Design
Before You Request a Quote
The Data That Makes a Quotation Accurate
You do not need every item to start. The more of this you can share, the faster we can confirm the coating, form and price.
Process data
- Electrolyte or water, concentration and pH
- Operating temperature
- Current density or total current and voltage
- Duty cycle and polarity reversal, if any
Geometry data
- Drawing, sample photo or measurements
- Titanium form and active area
- Electrode spacing and mounting
- Terminal and busbar connection
Commercial data
- Sample quantity and annual volume
- Target delivery date
- Packaging and labelling needs
- Documents required with shipment
Have part of this data ready? Send what you have and we will tell you what is still missing.
Send My Project Data
Products by Application
Which Product Lines Are Evaluated for Each Application
Custom titanium electrodes are available for every application. The other lines are usually discussed first where marked.
| Application | MMO anodes | Platinized anodes | Custom electrodes | Electrolytic cells |
|---|---|---|---|---|
| Water treatment & disinfection | Often first | On review | Available | Often first |
| Sodium hypochlorite generation | Often first | On review | Available | Often first |
| Electrodialysis & descaling | On review | Often first | Available | On review |
| Electroplating & electrowinning | Often first | Often first | Available | On review |
| Cathodic protection | Often first | On review | Available | On review |
| Hydrogen water systems | On review | Often first | Available | Often first |
"On review" means the line can be discussed when your process data points to it. Final selection always follows your operating conditions.
Want the full picture for your application first?
Browse All Applications
Quality Control
Every Product Line Passes the Same Inspection Route
From incoming titanium to the export crate, 11 inspection checkpoints keep repeat orders matched to the sample your engineers approved.
Material
Titanium grade, form and condition verified before cutting.
Fabrication
Dimensions, holes, welds and terminals checked against your drawing.
Coating
Coating process controlled and the surface visually inspected.
Final & shipment
Final drawing check, identification and protective packing.
Qualifying a new electrode supplier? See exactly how we inspect.
View Quality Control
From Sample to Repeat Supply
How a Product Order Moves Through Our Factory
The same path applies to every product line, whether you need a replacement electrode or a new design.
Send your data
Operating conditions plus a drawing, sample photo or measurements.
Engineering review
Coating direction, titanium form and open questions confirmed before quoting.
Sample validation
Samples from 1–10 pieces to test fit and performance in your own cell.
Approval
The approved sample and drawing revision become the production reference.
Repeat supply
Made to the approved drawing, inspected, packed and shipped for export.
Read how we handle drawings, samples and OEM projects.
View Custom Service
Request a Quote
Tell Us Which Product You Need and How It Will Run
Choose a product line, share your operating data, and our engineers reply with a coating direction, a drawing review and the next steps for a quotation.
- A product-specific checklist appears when you pick a line
- Drawings can be sent by email after submitting
- NDA available for confidential designs
Product Inquiry
Fields marked * are required.